Posts Tagged ‘milling’

Class: Technology, CNC Milling
Software: SketchUp, 3dsmax, ArtCAM, Match3
Material: Plywood 10*10*1 sm

Challenges: Create a tile with your own drawing using cnc machine

IDEA

 

The idea was to create a panel of Soviet hruschovka with its typical inhabitants.

 

DESIGN PROJECT

In the beginning, the base unit with clear dimensions in the sketchpUp was designed, exported to 3dsMax, where entourage and staffing – curtains, grandfather, cat and flower were added. Later, the model was exported to stl.

model from scetchUp

finished model

PREPARING WAY

To create a tile it was necessary to prepare a path for bits in the CNC machine. The path consists of two parts: draft and finish. Rough removes large masses, has a big step, but it works roughly. Pure has a smaller step on all axes, but takes much more time. When creating a path, you need to upload a file stl, specify the thickness of the material, and also the bit for the finishing and roughing path, then in the final path, you can choose the way to create the picture in the last step: one-way, two-way, radial and ect.

 

PROCESS OF MILLING

 

RESULT

 




 

 

 

 

3d builder milling | CNC milling class

Equipment | software

3d builder, Photoshop 

 



Task


Firstly, It was necessary to cut out a relief tile by 10 * 10 (as an example – Barcelona’s diverse tiles)

But this stage is development of the tile in bigger scale but by thw same software

 



Process of preparation


The topographical relief of the terrain was chosen to turn it into a kind of biomorphic surface, similar to both natural landscape and biomimetic structures.

A raster image with lines was taken, then painted in Photoshop with white-black polygons, where black is the lowers level. Then this colored image was dragged to the 3d builder, where the final form of a relief was prepared.


Then I experienced with similar structures, for example, in order to create a kind of biomorphic window panels.

Because black is the lowers level, black color here – window hole

   

     

3d builder processing:

 

   
  

Final module being milling:

 

 

 


CNC milling class

 


Equipment | software



3d builder, Photoshop – model preparing




artCAM, mach3 – software for CNC


Cnc machine – printing

 



Task




It was necessary to cut out a relief tile by 10 * 10 (as an example – Barcelona’s diverse tiles)


Process of preparation



The topographical relief of the terrain was chosen to turn it into a kind of biomorphic surface, similar to both natural landscape and biomimetic structures.


A raster image with lines was taken, then painted in Photoshop with white-black polygons, where black is the lowers level. Then this colored image was dragged to the 3d builder, where the final form of a relief was prepared.






 

Then this file was exported to stl format and open with artCAM software allowing to set the dimensions of a string, tile surface, etc.

 










 


Then it was open directly with mach3 for the last settings before the milling.





 

The printing took approximately 30 minutes

 








 


The result was good








Then I experienced with similar structures, for example, in order to create a kind of biomorphic window panels.


When the project was completed, I faced with the similar example at the Mars Museum of Modern Art. Probably such table can be the next stage of the module-tile development

 




 

p.s Thanks Ivan Mitrofanov for assistance!

address: 20 Myasnitskaya ulitsa
(metro stations ‘Lubyanka’ and ‘Kitay-Gorod’)
Moscow 101000 Russia

phone: +7(495)772-95-90 *15026

email: city@hse.ru