Posts Tagged ‘3D Printing’

Class : Technology / 3D Printing Software : Rhinoceros, Microsoft 3D Builder, CURA Equipment : Ultimaker 2 GO Materials : PLA (1.75 mm)   Challenges  : 
  • Operating and settings of 3D Printer
  • Setting up the printing parameters in CURA
  Approach : We were introduced to 3D printing using the various 3D Printing devices available in our LAB and I decided to work with the Ultimaker 2 GO as it seems precise and less complicated. Ultimaker 2 GO requires the software named “CURA” in which the 3D file (.stl in my case) is processed for loading into the machine using a standard MicroSD card.   Working Process : I wanted to learn how to operate the Ultimaker 2 GO, so I downloaded a pre-modeled 3D file for an earphone case and made some modifications using Rhinoceros and exported the 3D file in .stl format. I checked this .stl file for any errors and then loaded it into “CURA”, arranged the parts for printing and then loaded it into the Ultimaker 2 GO. Below you can see a screenshot of the.gcode file which is ready to be sent for 3D printing   Parts of the model :   Fixing the Parts: The core has two hollows to act as pivots where the end of the outer shells can clamp onto and then enclose the core.







Result:




Class: 3D printing class
Software used: Ultimaker Cura
Device used: Ultimaker 2 Go
Components used: 3D model from thingiverse.com
Materials used: PLA plastic 3mm

address: 20 Myasnitskaya ulitsa
(metro stations ‘Lubyanka’ and ‘Kitay-Gorod’)
Moscow 101000 Russia

phone: +7(495)772-95-90 *15026

email: city@hse.ru